If your Bissell ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner isn’t spraying, it can be frustrating. This issue often stems from simple causes like clogs, low water levels, or pump problems. Fortunately, most fixes are straightforward and safe to perform at home.
Follow these step-by-step instructions to diagnose and resolve the spraying issue, ensuring your carpet cleaner works efficiently again.
Key Takeaways
| Check for clogs | Blockages in the nozzle or hose can prevent spraying. |
| Ensure proper water levels | Low water or solution tank levels can stop spray functions. |
| Inspect the pump and hoses | Pump malfunctions or damaged hoses can cause spray failure. |
| Clean the filters | Dirty filters restrict water flow and spray. |
| Verify solution concentration | Incorrect solution mix may affect spray performance. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug the Cleaner
Always disconnect your Bissell cleaner from power before troubleshooting. This ensures safety when inspecting or cleaning parts.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check the Solution and Water Tanks
- Remove both tanks from the cleaner.
- Ensure they are filled with water and cleaning solution, as needed.
- Refill if levels are low, making sure the tanks are properly seated when reattached.
Step 3: Inspect and Clear Clogs
- Check the spray nozzle and hose for blockages. Remove any debris or build-up.
- Use a small brush or toothpick to clear clogs carefully.
- Run water through the hose and nozzle to flush out any remaining obstructions.
Step 4: Examine the Pump and Hoses
Look for leaks, cracks, or kinks in the hoses. If the pump is making noise but not spraying, it might need cleaning or replacement.
If damaged, replace the hoses or consult a professional for repair.
Step 5: Clean and Replace Filters
- Remove filters from the cleaner.
- Wash them with warm water and mild detergent, then dry thoroughly.
- Reinstall filters securely to ensure proper water flow.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 19.6 lbs
- ✔ Cord Length: 25 ft
- ✔ Warranty: 2 years
JORAIR Brush Replacement Compatible
- ✔ Weight: 1.2 lbs
- ✔ Package Dimensions: 10 x 8 x 4 inches
- ✔ Warranty: N/A
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner offers powerful suction, heatwave technology, and dual DirtLifter PowerBrushes, making it a top choice for tough stains and embedded dirt. Its design facilitates easy maintenance and effective cleaning.
Pros:
- Powerful suction with TurboStrength motor
- Effective pet stain removal
- Heatwave technology maintains water temperature
- Quick dry express mode
Cons:
- Heavier than some models
- May require regular filter cleaning
- Can be noisy on high power
Best for: Pet owners and deep carpet cleaning
Not ideal for: Light cleaning needs or small spaces
Bottom line: Reliable deep-cleaning performance with user-friendly features.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement compatible with Bissell CrossWave ensures your machine stays in top condition. It includes multi-surface brush rolls and filters, helping restore optimal spray and cleaning performance.
Pros:
- Affordable 3-pack of brushes and filters
- Compatible with various CrossWave models
- Easy to install
- Effective cleaning performance
Cons:
- Not compatible with non-CrossWave models
- Additional replacement parts may be needed over time
- Limited to specific models
Best for: Maintaining cross-surface cleaning efficiency
Not ideal for: For non-CrossWave Bissell models
Bottom line: A cost-effective way to keep your CrossWave performing like new.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying?
Common causes include clogs in the spray nozzle or hose, low water or solution levels, pump issues, or dirty filters. Follow the troubleshooting steps to identify and fix the problem.
How do I clear a clog in my Bissell cleaner?
Remove the spray nozzle and hose, then clean out any debris or buildup with a small brush or toothpick. Rinse the hose and nozzle with water to ensure clear passage.
Can I use any cleaning solution with my Bissell?
It is best to use Bissell Multi-Surface Solution or other compatible cleaning formulas designed for your model. Avoid using harsh chemicals that could damage the machine.
How often should I clean the filters?
It is recommended to clean the filters every 3-6 months, or more frequently if you notice a decrease in spray performance or suction.
Restore Your Carpet Cleaner’s Spray Power
By following these troubleshooting steps, you can resolve most issues causing your Bissell carpet cleaner not to spray. Regular maintenance, such as cleaning filters and inspecting hoses, will keep your machine functioning optimally. With proper care, your cleaner will continue to deliver professional results, keeping your carpets fresh and spotless.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
