If your Bissell ProHeat 2X Revolution Pet Turbo isn’t spraying water or cleaning solution properly, it can hinder your cleaning efforts. Often, this issue stems from clogs, blockages, or pump problems. Fortunately, with some simple troubleshooting steps, you can often fix the problem yourself, saving time and repair costs.
Follow this step-by-step guide to identify and resolve the common causes of spraying issues and get your carpet cleaner working like new.
Key Takeaways
| Check for Clogs | Clogged nozzles or hoses are a common cause of spraying failure. |
| Inspect the Solution Tank | Ensure the tank is filled correctly and seated properly. |
| Examine the Pump and Hoses | Look for blockages or leaks in the pump and connecting hoses. |
| Clean or Replace Nozzles | Dirty or blocked nozzles need cleaning or replacement. |
| Test After Troubleshooting | Verify spray function after each step to identify the fix. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Motor Technology: 40% more suction, quieter operation
- Max Clean Mode: Removes dirt, stains, allergens
- Express Clean Mode: Dries carpets in 30 minutes
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug the Cleaner
Always disconnect the power before starting any troubleshooting to ensure safety. Unplug the machine from the outlet and allow it to cool if recently used.
Step 2: Check the Solution Tank and Nozzle
- Remove the solution tank according to the user manual.
- Inspect the nozzle at the spray outlet for blockages or buildup.
- If clogged, clean the nozzle with warm water and a soft brush or pin.
Step 3: Inspect the Hoses and Pump
- Locate the hoses connecting the solution tank to the pump and spray nozzle.
- Check for kinks, leaks, or obstructions.
- Clear any debris or buildup inside hoses by flushing with water or using compressed air.
Step 4: Clean or Replace Nozzles and Filters
If cleaning doesn’t restore spray, consider replacing nozzles or filters. Use compatible replacement parts like the JORAIR Brush Replacement if needed.
Step 5: Test the Machine
Reassemble all parts, fill the solution tank, and plug in the cleaner. Turn it on and select the spray mode to see if the issue is resolved. Repeat steps if necessary.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: Allegedly lightweight for ease
- ✔ Power Cord: Long for extended reach
- ✔ Tank Capacity: Standard for deep cleaning
JORAIR Brush Replacement Compatible
- ✔ Package Includes: Multiple brush rolls and filters
- ✔ Compatibility Note: Check model before purchase
- ✔ Ease of Use: Simple to install and replace
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers strong suction and effective cleaning modes. When it fails to spray, troubleshooting typically involves checking for clogs or blockages in the nozzle or hoses, which are simple to solve.
Pros:
- High suction power with TurboStrength motor
- Multiple cleaning modes including MAX and EXPRESS
- HeatWave technology maintains water temperature
- Dual DirtLifter PowerBrushes for embedded dirt
Cons:
- Can clog if not maintained properly
- Requires regular nozzle and filter cleaning
- Potential pump issues if not serviced
Best for: Pet owners and deep carpet cleaning
Not ideal for: Users looking for a lightweight or handheld model
Bottom line: Regular maintenance and cleaning of nozzles and hoses can resolve spraying issues.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible kit offers multi-surface brush rolls and filters compatible with Bissell CrossWave models, helping maintain your cleaner’s spray and suction performance.
Pros:
- Compatible with multiple Bissell CrossWave models
- Includes 3 brush rolls and filters
- Affordable and easy to install
- Enhances cleaning efficiency
Cons:
- Only compatible with specific models
- May require additional parts for full repair
- Brush size limited to 9.84 inches
Best for: Replacing worn brushes and filters to restore spray
Not ideal for: For unrelated Bissell models outside CrossWave series
Bottom line: Replacing brushes and filters keeps your cleaner spraying and suctioning effectively.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include clogged nozzles, blocked hoses, or a faulty pump. Regular cleaning of these parts often resolves the issue.
How do I clean the spray nozzle?
Remove the nozzle, soak it in warm water, and clear any debris with a soft brush or pin. Reinstall once clean.
Can I use any solution with my Bissell cleaner?
Use only Bissell Multi-Surface Solution or other recommended formulas to avoid damage and ensure proper spraying.
When should I replace the filters and brushes?
Replace them when visibly worn or clogged to maintain optimal spray and suction performance.
Restoring Your Carpet Cleaner’s Spray Function
With a few simple checks and maintenance steps, you can often fix your Bissell ProHeat 2X Revolution Pet Turbo’s spray problem. Regularly inspecting nozzles, hoses, and filters will keep your machine working efficiently and extend its lifespan. If issues persist, replacing worn parts ensures continuous, effective cleaning performance.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
